The Martin Professional RUSH MH 5 Profile is a 75 Wattt LED Moving head spot that features efficient optics that can deliver stunning effects and colors, through the use of it's two color wheels, two gobo wheels, and rotating prism. The Martin RUSH MH 5 Profile offers full effects in a super compact housing thus making it perfect for DJs, bands, clubs, bars, cruise ships and installations where small footprint and low weight is critical.
Martin Professional RUSH MH 5 Profile Features:
Compact 75 W LED profile moving head
Super bright - efficient optics
Rotating gobo wheel
Fixed gobo wheel
2 x color wheels
Electronic dimming and strobe
3-facet prism
Martin Professional RUSH MH 5 Profile Specifications:
Physical
Length: 290 mm (11.5 in.)
Width: 187 mm (7.4 in.)
Height: 416 mm (16.4 in.)
Weight: 9 kg (19.9 lbs.)
Dynamic Effects
Color wheel 1: 8 colors plus open, rotation with variable direction and speed
Color wheel 2: 8 colors (incl. 1 x UV, 2 x CTC) plus open, rotation with variable direction and speed
Rotating gobo wheel: 6 gobos plus open, wheel rotation and gobo rotation
Static gobo wheel: 7 gobos plus open, wheel rotation and shake
Electronic 'shutter' effect: Strobe effect, pulse effects, instant open and blackout
Prism: Indexing and rotation with variable direction and speed
Focus: Motorized
Electronic dimming: 0 - 100%, four dimming curve options
Pan: 540°
Tilt: 270°
Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming
Control options: DMX, stand-alone
DMX channels: 16
Stand-alone trigger options: Music trig, auto trig
Stand-alone sequences: 4 pre-programmed shows
Music trig sensitivity: Adjustable
Setting and addressing: Control panel with backlit LCD display
Protocol: USITT DMX512/1990
Optics
Light source: 75 W LED engine
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer's test conditions:
Construction
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
Installation
Mounting: One quarter-turn bracket for rigging clamp
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Connections
AC power in/thru: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 165 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
